A miter saw is a tool that can make cuts at a variety of angles, using a blade, and it can be used almost on any type of material, metal or non-metal. Most of the workshops own a miter saw, because it is really a great help and saves time and hard work just with a plug-in and a few cuts to get the best angle. One that is single-bevel will make cuts in one direction, but a double-bevel can be used in both directions for more flexibility and accessibility.
Best Miter Saw of 2021
Before investing in one, you may want to know first something about the features that will make your work easy, such as the higher are the amps, the more power of cutting it will have; the blade size is important because a larger diameter blade can make longer cuts; depth stops let you control how deep the cut will be; electric brakes can stop the blade almost immediately, providing more safety; dust collectors or dust bags can keep the interior of the saw clean as also the work space; and laser guides help you to cut with accuracy. These are some of the features that can be met at almost every model, depending on its size, capacity and weight.
Also, you have to consider that some models are more lightweight than others, very useful if you need to carry one, or you can choose one that can be mounted to a bench, depending how you will work with it.
Having some basic information about a miter saw, we hope that you can choose one of the following best miter saws in order to find the one that is going to be your right hand at work.
DEWALT DW715 15-Amp 12-Inch Single-Bevel Compound Miter Saw
DEWALT presents a saw model that makes precision cuts due to its 12-inch versatile blade and that can handle a variety of materials with no worries. Operating a powerful motor, it offers a no-load speed of 4,000 RPM and, for easy setups, an adjustable stainless steel meter detent plate features 11 positive stops.
You also have the possibility to choose the setup for bevel cuts between 0 degrees and 50 degrees, both left and right, adding versatility. Steel bevel stops are easy to find and set at common angles and, in addition, a tall, sliding fence supports work with crown molding and base molding. Weighing just 42 pounds, this miter saw is lightweight and it’s portable, featuring a built-in carry handle.
The blade is thin, sharp, presenting 32 teeth, that are enough even for the hardest materials. It is suitable for doing any type of constructions, having the miter angle correctly calibrated from the factory.
The outside diameter of the dust channel is 1.5 inches and the saw comes with a dust bag that slides over. The box contains 12- Inch miter saw, carbide blade, dust bag, and blade wrench. This saw is built to make cuts of many angles, has accurate cuts and can be used right out of the box, having a precise alignment.
Hitachi C10FCE2 15-Amp 10-inch Single Bevel Compound Miter Saw
This miter saw offers intense power, accuracy and safety, all needed for either a professional or a beginner. The 15-Amp motor can handle most framing materials, plywood, hardwoods and lumber, giving clean cuts.
The optional laser can be turned on or off and it’s a great feature for those that work in a closed space and may need an extra guiding light to keep the dimensions accurate. The stock blade has 24 teeth that has plentiful consistency and provides the right cuts, avoiding vibrations.
Thanks to the horizontal handle grip with vibration- reducing material, your hand will feel comfortable and in control throughout the whole process of cutting and won’t get sore. To get precision cuts, adjust the bevel up to 45 degrees to the left and a good help in keeping the precision of the cuts are the positive miter stops that let you select preset points at specific angles.
The dust collector bag that comes with the miter saw is very useful by keeping the interior components of the saw dirty-free and by helping you to keep a clean work. The box contains compound miter saw, 10-inch 24-teeth blade, extended fence, dust bag and instructions.
DEWALT DWS799 Sliding Compound Miter Saw
For more power and durability, this model has sturdy materials, plastic and metal, a dual bevel, and provides a great cut capacity. The motor is powerful and not very loud, operating with 15 Amp and 3,800 RPM, offering an innovative dual horizontal steel rails with clamping mechanism and linear ball.
It has a back fence design that cuts up to 2×16 dimensional lumber at 90 degrees and 2×12 at 45 degrees. The dust collection pipe is a two-part pipe that joins together with two holding screws and you can use the bag or to connect it to a vacuum, it is useful by keeping the interior components of the miter saw dirty-free up to 75% and also keeps your work space clean.
The miter saw is very well balanced, so you can carry it with just a hand, holding it by its handle and there will be no danger, also, due to its great base, your work piece will not slide or get knocked out once you start the motor. It is ready to be use out of the box and the depth and length of the cuts are clean and flawless.
Ryobi ZRTS1345L 10 in. Compound Miter Saw with Laser Line
This is a Certified Refurbished product, tested and certified by Ryobi, looking and working like new. It is a full-function powered saw: it does compound miter cuts and also bevel cuts on small portions of your work, and, of course, cross cuts, it can cut very well angels, especially for framing, in the plane of the board or perpendicular to the plane of the board.
The base is made of metal and it comes with a thin, sharp, carbide blade. The laser is accurate and it can be adjusted: the closer the blade gets to the stock, the more accurate the laser is. For more accuracy, the dual bevel scale is easily visible from both sides and, for more safety an electric brake stops the blade in seconds.
You can cut with it bevel cuts to the left up to 45 degrees and miter cuts to either side, it does not slides forwards and backwards, only side to side. It is more lightweight than other models, it is portable, but it has good balance and keeps you and your work safe.
WEN 70716 10-Inch Sliding Compound Miter Saw
Designed to complete any task, this miter saw offers a powerful 15-Amp motor that supplies 5,500 RPM and a spacious work table. The work table includes two support arms, a fence and a hold-down clamp and the automatic blade retracts upon operation for more safety.
A 60- tooth carbide blade provides a maximum capacity 3.25 inch and 11.5 inches deep, you can bevel cut with it from 0 to 45 degrees to the left and miter, in both directions, up to 52 degrees and it cuts through a 4×4 10 inch boards using the sliding action with ease. The saw is not very loud, runs very well, but it may be louder than typical circular saw. It has stops and markings to easily set the cut angle, the pre-set miter angle stops consists of a ball bearing and spring.
Even though is a full- featured miter saw this unit is more lightweight than other saws, weighing only 30 pounds, because 95% of it is made of aluminum and plastic, so it’s portable and it has a carrying handle to make transportation simple.
A workshop is complete only with a miter saw always ready to run and give clean cuts and that is sure. If you are a beginner, all the information about its features may seem too much at once and hard to handle, but we suggest to start with simple cuts, and you will surely find it comfortable and safe to use after a few experiences.
The models presented are for both beginners and professionals, due to their full- featured designs. It is recommended to read carefully the instructions before using the saw, because it will be simpler just to know exactly what to do and what to use and also more safe for you.
Knowing about the tool you’re about to use is safer in case that any problems appear. One of the issues often noticed with these machines is that, in the first few uses there can be a burning electrical smell (but no smoke) that seems to come from the motor area.
That happens because the wires are warming up for the first time, but it will disappear quite soon, without leaving any damage. But, it is best to use its warranty to have it replaced or fixed. Hoping you won’t need to face any obstacles, we wish you to enjoy using a new a miter saw.