A plasma cutter is used to cut any electrically conductive metal and it behaves like a high-temperature gas, but with a major difference and that is the fact it conducts electricity in order to cut through a metal. If you work with metals often or on a daily basis, you may know how important it is to have near you a good plasma cutter that provides accurate and clean cuts whenever and that matches your needs and accessories.
Best Plasma Cutter of 2021
Plasma cutting units improved in time and now you can enjoy their productivity at a lower price, much quicker, they are portable, offering the chance to carry one of these units right there where you need, did not requires pre- heat and the arc cuts through a variety of metals, like ones with poor heat conductivity, like stainless steel, or ones with great heat conductivity, like aluminum.
Being similar with a welding machine in some aspects, the capacity of plasma cutter is determined by its voltage and amperage. Though, unlike a welding machine, a plasma cutter requires low amperage levels and high voltage. Also, torch accessories and consumables may be different for several models of such machines.
If you are a beginner you should take time to practice a little with such a tool, because the cut will reflect any hand movement and that can make either good or bad on the work surface.
For those that never used a plasma cutter, or simply happens not to have very steady hands, there can use circle guides or roller guides for accuracy. Considering the functions a plasma cutter offers, we present you with the best models that can handle any challenge and give a perfect result.
Lotos LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter
This plasma cutter powers 50 Amp, together with an automatic dual voltage, 110V/220V and dual frequency- 50Hz /60Hz, for you to achieve clean cuts and the final result you desire.
It’s a machine with a handle for portability, very easy to set up and it will handle almost any type of metal. It uses non-hazardous compressed air to cut cooper, aluminum, stainless steel, alloy steel and mild steel and other conductive materials. The plasma cutter has a pilot arc function integrated and utilizes IGBT power drive matrix technology in order to deliver a precise cut.
To change between 110V and 120V, you just have to connect the one you want and it will change automatically, and the product is shipped as a 22V unit. Its maximum severance thickness is 3/4Inch and maximum cut thickness is 1/2Inch. The torch for this machine, comes with the package, is 13ft long and has 3 prong connections, it cuts efficiently through rusty or rough surfaces.
If you want to connect it, the back of the unit has a regulator attached. It comes with a canister filter, and two extra consumables to replace when needed. Model LTP5000D is designed for both professionals and hobbyists.
PRIMEWELD Premium Rugged 50A Air Inverter Plasma Cutter
Providing the best precision in cuts for metalwork, this digital inverter plasma cutter is powered by 50Amps and has both options for 119V or 220V for diversity and for the ones that have a limited outlet.
Its maximum severance thickness is 3/4Inch and 5/8Inch for mild steel, 1/2Inch for stainless steel and 1/2Inch for aluminum. It is portable- it has a handle on top for you to carry it easy. This plasma provides a steady output for steady metals and high power output for hard, thick metals, it is used in rugged industrial environment.
Also its features make it perfect for any construction project, garage working or hobbyists. The plasma cutter has a regular house hold outlet and, if you want to change between 110V and 220V you can connect the one you want and it will change automatically.
The package includes 3 prong ground clamp and cable, air filter and regulator, air hose connections, 4 clamps and 2 coupler air hose. All its functions enable working in any environment. The result is a clean cut and less fire hazard and maintenance of the unit.
Super Deal Plasma Cutter Cutting 50AMP CUT-50 Digital Inverter
This digital inverter plasma is ready to be used right out of the box it comes with all the consumables and items you need to start. It is powered by 50 Amps, you can switch the amperage you need using a rotating button.
Simply and efficiently designer, the digital readout on the front of the plasma cutter is easy to read and the unit is portable- it has a handle on top to make it easy for you to carry. Depending on your needs you can alternate the dual voltage, choosing to work with 110V or 220V.
This machine isn’t a pilot arc plasma cutter- it is a high frequency plasma cutter that offers clean cuts on most types of metals. It has a current range between 20- 50A, a main fuse 16/22A, a duty cycle of 60% and efficiency of 85%. It is recommended to read carefully the manual so you can follow the instructions and work safe.
The package also comes with all the items you need: one LG-40 cutting torch, one earth clamp, one air regulator, 2 plasma tips, a PG head, 2 hoops, 2 gas pipe claspers, and a welding mask to keep your eyes and face safe.
Zeny DC Inverter Plasma Cutter Cutting Machine 50AMP
Perfect for any metal workshop and garage working activities, this portable tool is large and capable enough to provide all the power you need to solve any challenge in metal cutting and it’s small enough to allow you to carry it wherever you may need it.
The plasma cutter comes with a separate air regulator to the bottom corner and with two hose clamps. Its maximum cutting thickness is 1/2Inch, the duty cycle is 60% and efficiency is 85%.
This unit doesn’t have a pilot, to get it to cut you have to lightly drag the tip on the work surface, it is easy to use. You can choose between 110V and 220V, depending on your needs and you can set the amperage in order to get a nice cut.
There is also a switch on the front of the plasma cutter that is to control how long the air runs after you let off the trigger. It can be used to cut immediately after you unpack it, cuts almost every metal and the cuts it gives are clean.
Lotos LT5000D Plasma Cutter 50Amps Dual Voltage Compact Metal Cutter
Combining high speed and precision for the best cuts, model LT5000D it’s a plasma cutter that handles a large variety of metals such as stainless steel, alloy steel aluminum, cooper and other metal materials.
Offering automatic dual voltage, this plasma can change between 110V and 220V, its maximum clean cut thickness is 1/2Inch and maximum severance thickness is 3/4Inch. The machine is powered by 50 Amps and you can change the amperage depending what metal you have to work with.
The unit includes an air regulator with a bracket for mounting and it also has an internal air solenoid that keeps the airflow shut off until you press the trigger button. After you finish cutting and release the button, the air will still flow for few minutes to cool the head.
The plasma cutter provides steady output for thin metals and high power output for hard, thick metals, the inverter power supply generates capable DC welding currents. This unit is suitable for professionals or hobbyists due to its remarkable functions.
It is recommended to read carefully the instructions when purchasing such machines because they can be dangerous in the hands of a truly novice. Also, you should follow proper safety procedures and, of course, consider wearing safety equipment even if you are used with a plasma cutter.
It’s better to prevent than to treat, for sure! It may be useful to know the color codes of a cord before using them: the black wire is always a hot wire, the white wire is a neutral wire and the green wire is a ground wire.
As most of the plasma cutters have a dual voltage, you can convert between 110V and 220V, depending on what metal you have to work with, set the amperage control, and check the air pressure every time- it’s an action that will learn you to pay attention at details for safety. When using such a machine, you should concentrate but also have a relaxed hand, because holding the torch firmly can make your hand to shake.
For a trouble-free activity you need a good plasma cutter, patience and attention. After using such a great machine, you’ll see how old cutting methods were just a waste of time and energy.