How To Use A Router Table
When it comes to portable and versatile tools to use on your woodcraft, certified handymen consider a router table is the epitome of the field, counting for numerous uses and being extremely handy. However, in order to safely maneuver a router table you will require some skills and techniques. Read below and find the easiest techniques in order to achieve perfectly crafted wood blocks, slides, decorative edges, dovetails or mortises, as well as many others.
What is a routing table?
You may or may not be acquainted with a routing table, but that doesn’t mean you cannot handle one properly with a bit of help. According to crafting specialists, a routing table represents a stationary device specifically designed for woodworking. It features a vertically oriented spindle where a specific router penetrates the wood block. The machine can run anywhere from 3,000 to 24,000 rotations per minute, meaning it is designed to perform specific high intensity wood crafting. This machine usually comes equipped with a vertical fence on which the work piece is pressured against the machine in order to control the type, size, shape and depth of the cut performed.
What are the variations of a router table?
If you want to purchase this device, you should bear in mind that there are three different types, depending on the kind of job you want to perform and its accuracy. The floor standing machines are usually the heaviest ones and will perform more complicated tasks into the woodcraft piece. On the contrary, the small machines coming in the shape of bench-tops are easier to handle but will not perform on the same speed and accuracy as the self standing machines. There are also various accessories which can be bolted into table saws or mini router tables. They are mainly used to perform low intensity tasks that can usually be done by using other similar wood cutting materials, products and machines.
How does the machine actually work?
There are three different types on which you can use a router table, but in all cases you will require an accessory in order to easily direct the wood piece you are working with. The most used tool for this matter is called a fence, and you can take advantage of this tool by feeding a small wood work piece into the cutting edge of the router table. In addition the fence will also make dust collecting more easily, thus it becomes an essential part in the cutting process.
How to work with a router table?
When using a fence you will have to typically slide or swing the wood in one direction, from light to left and this way you will achieve the most common types of cuts. The most important rule when using a router table is to always change accessories appropriately and according to your own needs on woodcraft. In order to do that, make sure to disconnect the power source each time you are changing the parts or the accessories used.